Suction Cup Mount for Wilson Omni External EVDO Antenna

Alex

I was packing up gear to do some load-balancing testing with six EVDO devices and discovered that my trusty mag-mount antenna was in Chevy Tracker I had loaned to family for the weekend.

While I own and love my booster antenna, I wanted an external antenna to use with in-vehicle repeater so that signal was provided to multiple devices at the same time.

Pondering my situation, I stumbled across a suction cup dent puller I had neglected to put away, and the proverbial lightbulb came on inside of my head!

Below you'll see a composite photo showing the end result: a suction cup mount to hold a Wilson Omni External EVDO Antenna onto the back of my truck.

As I recall, the 4 1/2" suction cup cost me about $5 at local AutoZone, and I'm sure anyone who wants to do same will easily find in similar chainstore auto-supply shops. Here's a link to a bunch of similar units on google shopping:

Suction Cup Dent Pullers on Google Shopping

I did quite a bit of freeway driving and my single cup solution held up just fine... For RVers who only put up their external antennas when needed, this would definitely do the job while parked at any campground!

Some of you may be thinking that this may not hold up well, given your rough-house ways... If more suction is needed, there are dual suction cup models that will lift 100-lb glass sheets... and I've even seen a four-cup model!

Those of you who already have your Wilson Trucker antenna nicely mounted to your rig may wonder why this is even worth mentioning.

Certainly, the proper mounting of an antenna always makes the most sense... but many folks prefer not to have a permanent or even semi-permanent antenna mounted on their rig, and the most common reason given to me is that they are selling their RV soon.

This suction cup solution is also a good idea for those who only want to own one antenna, but find the need to use it in more than one place.

I'm also certainly going to be recommending it to apartment dwellers, and folks who set up equipment at road shows.

Anyway, I thought I'd share the idea so that others can see yet another option for mounting the Wilson Omni External Antenna.
_________________
EVDO :: EVDO News :: EVDO Antennas/Routers/Amps :: Verizon EVDO :: Sprint EVDO :: Why Buy from 3Gstore?