ATT USB Connect and Toshiba Cam

Kokkos · EVDO Newbie Joined: 11 Aug 2008 Posts: 2

Does anyone know how to simply allow a web cam to be viewed behind the KR2 using an ATT USB Connect 881?

I have tried port 80, 8081 for the Camera (Tosiba IK-WB21A Supports) but can only pull up if connected directly to KR2.

I have tried Virtual Sever, DMZ, Gaming Port triggering. No success. Reset to factory default and have latest firmware.

If someone has successfully setup a webcam to pass through on ATT 3G Service using the KR2 I woul greatly apopreciate any advise.

Kokkos

Mackieman · EVDO Junkie Joined: 31 Oct 2005 Posts: 490

According to the documentation provided with that camera, the camera uses 192.168.0.30 as a default IP with DHCP disabled. Did you configure the camera for DHCP or are you using the static address?

Kokkos · EVDO Newbie Joined: 11 Aug 2008 Posts: 2

The Toshiba is using static 192.168.0.198

With my laptop plugged into the Lan of the KR2 I can pull up the camera with the DHCP IP of the ATT USB Card. But not form outside the Local nat.