KR2 HARD RESET does not seem to work

zajacik · EVDO Newbie Joined: 25 Nov 2007 Posts: 2

hi,

its worked before but for some reason my kr2 hard reset is not working. this is what i am doing...

1. remove power
2. push and hold reset button with paperclip ...
and at the same time.
3. apply power for 15 sec and then release reset button.

i say this is not working because my pw is not back to 'admin'.

any suggestions or comments.

thanks, ray

zajacik · EVDO Newbie Joined: 25 Nov 2007 Posts: 2

Mackieman · EVDO Junkie Joined: 31 Oct 2005 Posts: 490

Glad you figured out the issue. Also, as a point of procedure, you do not have to remove power, press the reset button, then apply power. That was the procedure with KR1. KR2 allows you to simply press and hold the power button while it is powered on. The LEDs will flash and the router reboots when the process is complete.